Disposable In-Line Adsorbers DIA-INxx


FEATURES

Completely Disposable

Blue Transparent Nylon & Virgin Kynar Body

Four Body Sizes

Wide Range of Adsorbents (DIA)

No Handling of Loose Adsorbents


APPLICATIONS

HVAC Purification

Analyzer & Sensor Protection

Low Cost Scrubbers

Last Chance Purifier

Zero Air Gas Calibration


Our Disposable In-Line Adsorbers consist of nylon or kynar bodies filled with granular adsorption material with integral inlet and outlet filter pads. For best results longer contact time will increase the efficiency of the desiccant media providing a more effective adsorber. A wide choice of adsorbents permits the selective removal of vapors from air and other gases. Desiccant choices are listed on page 4.

Our Disposable In-Line Adsorbers consist of granular adsorbent material ultrasonically welded into a see-through nylon or kynar body. Integral filter pads eliminate adsorbent migration. Four sizes are available, containing from 6cc up to 120cc of adsorbent.


  • Intermediate OEM High Flow DIA w/ Media (DIA-INxx)

  • Our intermediate range is utilized where higher vapor holding capacity is required. Larger volume for longer service life.
    Replace “xx” w/media required CC, 4A, 13X, SG, DR, MB, PP, HO, SB, CS

  • 1/4" Inlet / Outlet

  • 50cc of Volume

  • 230ºF Maximum Temp. At 0 PSIG

  • 100 PSIG of Maximum Pressure at 110ºF

  • 100% Grilamid TR 55 Blue Nylon body

  • Specify Adsorbent

  • Standard Gas Flow at 100 PSIG is 10.0 SCFM


004.jpg




Go Back 】 | 【 Close this window